CLOSE
HAVE A QUESTION?
CLOSE
SHARE WITH A FRIEND

Enter your name, and your friends name and email address

CLOSE
PERSONALISE YOUR ITEM
CLOSE
BULK ORDER QUOTE
CLOSE
Stock Notification

Balboa Heater - M7 - 2.0kW

Works with GS/GL Balboa Spa Packs

LID: 80465
Fits GS/GL Balboa Spa Packs
2.0kW
Incoloy Element
2" x 2" Tailpiece
£231.36 Inc VAT
( £272.19)
HTR-3877
58115
5 In StockSame day dispatch if ordered by 14:00
Balboa Heater - M7 - 2.0kW
£231.36
RRP £272.19

A very common hot tub heater assembly for the plastic GS/GL (GS500, 500Z, 501, 501Z) spa packs by Balboa.


Fitted with 24" M7 sensor technology to regulate spa water flow and temperature (Click HERE for Details)


Heater gaskets and split nut unions are also included making for easy installation and removal. Solvent weld sockets for 2" pipe. 

Fixed into place with 2 x mounting studs top and bottom.

The heater comes complete with two M7 sensors, pre mounted at each end of the heater tube ready for connection to the control box. These sensors monitor each other using the onboard software to regulate the spas functions of water flow and temperature. This technology allows for a correct operating environment for the heater.  The sensors automatically adapt to the flow direction and detect restrictions including dirty filters.

This Balboa heater assembly is quick to install and allows for easy servicing and troubleshooting, due to the split 2 inch buttress thread unions with O ring. The union is ready to accept glued 2 inch pipework. 

Note: 
Always use an appropriate spanner or long nose pliers to hold the terminal base before tightening or loosening the 10mm terminal nuts.

Model Information
Type Flow Thru
MPN 58145
Element Incoloy
Integrated in Spa Pack Yes
Sensor Type(s) M7 - Probe
Mount Type Stud
Length (includes tails) 381 mm
Plumbing Connection 2.0''
Electrical Info
Power 2.0 kW
Voltage / Hz 230V - 50/60Hz
Amps 8.0-8.5
Element Details
Element Type Incoloy
Element Length 10" (255mm)
Terminal Spacing 33 mm
Compatible Spa Pack
Compatible Spa Pack Balboa GS/GL Plastic Box
More Info

Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support

Customer Reviews

Write a review

star
star
star
star
star
Questions & Answers

Submit a question

 
warning
Confirm add to basket
Return to listing
Add to basket
COMPARISON BASKET
COMPARE